Ratio 59 Horizontal Bwd3 XWD1 cycloid Gear Ac Motor Speed Reducer Gearbox For Lifting
Description :
The cycloidal pinwheel reducer, a cutting-edge transmission apparatus, integrates the principles of planetary transmission along with the interlocking of cycloid pin teeth. This device can be segmented into three key sections: the input segment, the reduction unit, and the output segment.
Referred to as a planetary cycloid reducer due to its utilization of cycloid pin-tooth engagement and planetary transmission, this technology holds broad applicability across diverse sectors including petroleum, environmental protection, chemical processing, cement manufacturing, transportation, textiles, pharmaceuticals, food production, printing, lifting operations, mining, metallurgy, construction, power generation, and more. Serving as both a driving force and a deceleration mechanism, this device can be configured in horizontal, vertical, dual-axis, and direct-coupled setups to cater to varied operational requirements.
Cycloidal gear reducer Feature
• Single stage drive with reduction ratio 1:87, high effciency.
• Input shaft and ourput shaft are in the same axis, so it's compact in structure. .
• Cycloid gear with high overlap coefficient, steady the machine and lower the noise.
• The reducer is made by bearing steel, it's has a long sevice life.
Conditions of cyclodial gear reducer use
1. The cycloidal pinwheel reducer is allowed to be used in the occasion of continuous working system, and it is allowed to run in both forward and reverse directions at the same time. Some models of cycloid reducer only allow one-way rotation. 2. The rated speed of the input shaft is 1500 rpm. When the input power is greater than 18.5 kW, it is recommended to use a 960 rpm 6-pole motor. 3. The working position of the horizontally installed cycloid reducer is the horizontal position. The maximum horizontal inclination angle during installation is generally less than 15°. When it exceeds 15°, other measures should be taken to ensure sufficient lubrication and prevent oil leakage. 4. The output shaft of the cycloid reducer cannot be subjected to large axial force and radial force, and other measures must be taken when there is a large axial force and radial force.
Product Parameters
| Model: | BWD, BXD |
| Installation: | direct connection installation, flange installation |
| Motor: | factory equipped motor, Siemens, ABB, etc. |
| Ratio | Stage Ratio:9, 11, 17, 23, 29, 35, 43, 59, 71, 87 Stage Ratio: 121, 187, 289, 385, 473, 595, 731, 989, 1225, 1849 |
ensure the motor life , high-strength carbon steel material with good dustproof effect
High quality cycloldal wheel
High-quality bearing steel with excellent fire treatment, high strength, longrolling contact friction at contact parts
Each reducer needs to be airtight tested before spraying to minimize the incidence of oilleakage and air leakage. The long life of the packaged Fanbao reducer is good, thequality is more intimate, and the customer is more assured.
Boutique output shaft
Workshop :
Product Tags:
|
|
Horizontal BWD3 XWD1 Two Stage Cycloidal Gear Reducer AC Motor Ratio 59 Images
|
